Installation Advice:
--Even compatible vehicles should have their specifications checked.
--Before installation, thoroughly clean off any rust and dirt on the wheel hub. Check for any damage or cracks in the brake discs.
--When selecting a spacer, the thickness should be less than the minimum fender gap.
--After first installing, drive for 45 miles and check the tightness of the nuts once. Then, check them every 2,000 miles.
--If you lack experience in installing Wheel adapters & spacers for the first time, it is advisable to seek assistance from a professional to ensure proper installation.
Specification
Bolt Pattern: 4x4(4x100&4x101.6mm)
Hub Bore: 62mm
Thickness: 2"(50.8mm)
Stud: 1/2" x20
Quantity: 4 x Hubcentric Wheel Adapters