ECCPP 2PCS 5 lug 5x127mm Wheel Spacers 1 inch 5x5 to 5x5 rims Fit for 2006-2010 for Jeep Commander XK |2005-2010 for Jeep Grand Cherokee WK |2007-2018 for Jeep Wrangler JK/JKU
COMPATIBILITY LIST INCLUDED : The 5x5 Wheel Spacers 1 INCH fit for 2006-2010 for Jeep Commander |1999-2010 for Jeep Grand for Cherokee |2007-2016 for Jeep Wrangler
INSTALLATION WITH CONFIDENCE : The 5x5 to 5x5 Wheel Spacers 1" With Each Spacer would be 1" Wide Hub Bore Size 87.1mm Vehicle Bolt Pattern 5x5(5x127) Wheel Bolt Pattern 5x5(5x127) Thread Pitch 1/2"x20; (Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)
EXCELLENT DRIVING EXPERIENCE : Our 1 INCH WHEEL SPACERS 5 lug provide your car with an aggressive appearance while adding safety and stability to your car. It can effectively increase the wheelbase of the car, balance the center of gravity of the body, reduce body deformation, and solve the problems of drifting and tilting when the car is driving at high speeds and cornering at high speeds
STRICT QUALITY PERFORMANCE : The 5x127 to 5x127 WHEEL SPACERS 1" are made of high-quality forged 6061-T6 billet aluminum alloy and CNC precision machining, and the surface anodized coating can also protect the metal surface from environmental erosion under extreme conditions.CNC automatic processing ensures high accuracy and stability. These forged 6061 t6 aircraft aluminum wheel spacers are stronger
CHECK BEFORE YOU PURCHASING : 1 inch wheel spacer 5x5 to 5x5 Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 1/2 threads; 2) You have more than 1 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 1 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 87.1mm,advise torque specs at 75-85 Ft/Lbs
INSTALLATION TIPS FOR YOU : The use of a thread lock adhesive is encourage for Manufacture.The back of the wheel must sit flush on the adapter .The studs on the vehicle cannot stick past the face of the adapter. If they do,you may need to modify by grinding/trimming