Diodes Rectifiers
Loss of power brake rectifier module 108V half-wave rectifier Rectifier 04.91.010-CE07
Kind tips:
Due to the special nature of the product, buyers should do a no-load test first after receiving the product, and do not directly apply the brake coil.
reason:
If the buyer's brake coil has a short circuit or has been burned out, installing the purchased rectifier device will cause the internal diode to break down and burn out.
How to detect and determine whether the motor brake is burned out?
Use a multimeter to measure the resistance value of the brake coil. The normal resistance value is several hundred ohms! Under normal circumstances, if the brake coil, the resistance between any two
If it is zero or infinite or deviates greatly from the standard value, it can be determined that the coil is burned out! You can replace the brake with a one!