COMPATIBILITY LIST INCLUDED : For this 1 inch Wheel Spacers 5 lug ,please verify the bolt count,bolt circle diameter,center bore,and bolt size match your vehicle before ordering.Enter your Year/Make/Model in system garage filter(AMAZON CONFIRMED FIT)to validate product fitmentPlease check the item whether fit for your vehicle from Compatibility Chart with your vehicle's Year/Make/Model
INSTALLATION WITH CONFIDENCE : hubcentric Wheel Spacers 5x4.75 with Thickenss:1" or 25mm;Vehicle Bolt Pattern:5x4.75 or 5x120.7mm;Wheel Bolt Pattern:5x4.75 or 5x120.7mm;Thread Pinch:12x1.5;Inner Diameter:70.5mm;(Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)
STRICT QUALITY PERFORMANCE : The 5 lug wheel spacers 1 inch 5x120.65mm are made of high-quality forged 6061-T6 billet aluminum alloy and CNC precision machining, and the surface anodized coating can also protect the metal surface from environmental erosion under extreme conditions.CNC automatic processing ensures high accuracy and stability. These forged 6061 t6 aircraft aluminum wheel spacers are stronger
SUPERIOR SAFETY AND STABILITY : 5x4.75 to 5x4.75 WHEEL SPACERS - support and center the wheel to better resist impact loads from different road conditions and eliminate the risk of vibration.CNC automatic processing technology is used to ensure high precision and stability. The 10.9 stud can reach a tensile strength of 1000MPa, providing better structural support and safety.strict quality control, improve vehicle handling and stability, and prevent roll
CHECK BEFORE YOU PURCHASING : Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 12x1.5mm threads; 2) You have more than 1 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 1 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 70.5mm