MEIRIYFA EC5 to O Ring Terminal Cable,EC5 Female to 5/8“ O Ring Eyelet Terminal Power Wire Connector Extension Cable 100A with 10AWG Silicone Cord -50CM
【Scope of application】: EC5 to O-ring terminal cable, used for connection and conversion of solar photovoltaic, power ignition, generator, automobile or emergency power ignition peripheral products, etc.
【Connector】: EC5 female connector ensures good conductivity and continuous stability of the connection. O-ring terminals have more stable conductivity and longer service life.
【Material】: The outer quilt is made of 10AWG silicone wire, PVC material, soft and easy to bend, not easy to short circuit, insulating material can withstand high temperature/low temperature, firm and corrosion-resistant.
【Plug and Play】: The EC5 female connector is easy to install, the shell is one-shot molding, the inside and outside are smooth and convenient, plug and play, the O-ring terminal is firmer, and the use is safer and more reliable.
【Silicone wire】: Two colors of silica gel wire, the red end is connected to the positive electrode of the battery, and the black end is connected to the negative electrode of the battery.
Description
MEIRIYFA EC5 to O-ring terminal cable is used for connection conversion of automobile or emergency power ignition peripheral products, etc.
★EC5 female connector ensures good electrical conductivity and continuous stability of the connection.
★ PVC protective material, soft and easy to bend and not easy to short circuit.
★Easy to install, plug and play, safer and more reliable to use.
★Insulation material can withstand high temperature/low temperature.
★O-ring terminal has more stable conductivity and longer service life.
- Product name: MEIRIYFA EC5 to O-ring terminal cable.
- Material: Silicone wire/10AWG copper wire.
- Voltage: 12-36V.
- Cable length: 50 cm (19.7 inches).
- Current: 100A.
- Output interface: EC5 female.
- Input interface: O-type terminal.
- Red: Positive / Black: Negative.
【Package Included】: 1x ec5 to o-ring terminal extension cable.
Note: 1. Please make sure that the blue port must be in good contact with the host.
2. It cannot be ignited continuously, and the interval between each start is more than 30 seconds.
3. Remove the terminal within 30 seconds after starting the car.