Search

Search

Home / Kwaich / Replacement Parts
FLS820-012-1C 12V 40/30A SPDT 5-Pin Automotive Relay Mini ISO Cube 85/86/30/87/87a Universal for Cooling Fan, Fuel Pump, A/C Clutch, Headlight, Horn in Kuwait FLS820-012-1C 12V 40/30A SPDT 5-Pin Automotive Relay Mini ISO Cube 85/86/30/87/87a Universal for Cooling Fan, Fuel Pump, A/C Clutch, Headlight, Horn in Kuwait

FLS820-012-1C 12V 40/30A SPDT 5-Pin Automotive Relay Mini ISO Cube 85/86/30/87/87a Universal for Cooling Fan, Fuel Pump, A/C Clutch, Headlight, Horn

KWD 4
Brand
Kwaich
Weight
37 g
– 1 +

Special Features

  • Technical Specs & Model: FLS820-012-1C, coil 12 VDC; contact form SPDT (1C); 5-pin terminals 85/86/30/87/87a; rated load 40 A (NO) / 30 A (NC) at 13.5 V; max operating voltage 27 VDC; operate/release ≤10 ms/≤5 ms; insulation ≥100 MΩ; dielectric strength 500 VAC (coil-contact); mechanical life 1,000,000 ops; electrical life 100,000 ops; size about 28×28×25 mm; quick-connect ISO 280 spades.
  • Installation & Locations: fits standard 12 V relay positions in engine-bay power distribution/fuse-relay panels or interior junction blocks. Typical wiring: 30=battery feed, 87=load (NO), 87a=NC (if used), 85/86=coil. Verify socket is ISO mini-cube 5-pin with center 87a footprint before installation; match current rating and pinout on your original part. Works with common JD1912/JD1914 style sockets/harnesses (harness not included).
  • Broad 12 V System Compatibility (verify by pinout/size): Compatible with 12 V passenger vehicles, SUVs, pickups, vans, powersports, marine and RV panels that use a mini-ISO SPDT 5-pin relay in the engine bay or cabin—Cooling Fan Relay, Fuel Pump Relay, A/C Compressor Clutch Relay, Headlight/Fog/Horn Relay, Starter-control/Accessory circuits. Always confirm 85/86/30/87/87a markings and 40/30 A rating on the removed relay.
  • Durability for Under-Hood Use: silver-alloy contacts, 40/30 A resistive rating at 13.5 V, −40 °C to +85 °C ambient range, and rapid operate/release times help support stable switching for high-current loads in 12 V systems. Use appropriate wire gauge and protection (fuses/breakers) to match the load; ensure secure seating in the socket to avoid heat buildup.
  • Complementary Parts (for complete installs): Compatible with 5-pin mini-ISO relay sockets/harness pigtails (JD1912/JD1914 pattern) and standard ATO/ATC fuse protection sized for your load. Pairing a new socket/harness when terminals are heat-stressed helps restore reliability; route wires cleanly and avoid sharp bends or moisture ingress. (Accessories not included.)

Description

FLS820-012-1C 12V 5-Pin SPDT Automotive Relay Universal mini-ISO cube relay for 12 V power distribution circuits. Verify pin labels (85/86/30/87/87a), mini-ISO 5-pin footprint, and 40/30 A rating before installation.
Model: FLS820-012-1C (SPDT, 1C)
Coil: 12 VDC; Operate/Release: ≤10 ms / ≤5 ms
Contacts: 40 A (NO), 30 A (NC) @ 13.5 V; Max operating voltage 27 VDC
Terminals: 5-Pin (85, 86, 30, 87, 87a), ISO 280 quick-connect
Insulation: ≥100 MΩ; Dielectric strength: 500 VAC (coil-contact)
Life: Mechanical 1,000,000 ops; Electrical 100,000 ops
Housing size (approx.): 28 × 28 × 25 mm; Operating temp: −40 °C to +85 °C
Cooling fan, fuel pump, A/C compressor clutch
Headlight, fog light, horn, auxiliary accessories
Engine-bay or cabin fuse/relay panels in 12 V systems
Match pinout and rating to the removed relay; confirm mini-ISO 5-pin socket with center 87a.
Wiring reference: 30 = battery feed, 87 = load (NO), 87a = NC (if used), 85/86 = coil.
Use appropriate fuse/breaker and wire gauge; ensure the socket is in good condition.
Mini-ISO 5-pin relay socket/harness (JD1912/JD1914 style) – not included
ATO/ATC fuse holders sized to the circuit load – not included

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}