Absolutely nothing is worse than being out salting and your vibrator wiring harness has a short so your salt gets stuck in the spreader. Don't be left out in the cold trying to bypass a factory harness - we've made it easy to cut, crimp, and heat the shrink so you're back in business! This harness is professionally prepared and give you flexibility with 4-1/2" of wire that meets or exceeds OEM specifications for wire guage, quality, and coating. This easy-to-connect pigtail harness is used to repair the vibrator wiring harness on your SHPE salt spreader - it'll work on the harness side and on the vibrator side. Please note: this harness may arrive with the black and red wires flipped from what is shown in the picture. The colors will not match the original black and white wires on your harness. Please use discretion when cutting and attaching this repair end.