FEATURES
Manual start/automatic start.
Engine pre-heat
Engine monitoring and protection features
Protected solid state (PSS) outputs
Front panel mounting
Tamper proof engine hours counter
Remote start
LED indicators

BENEFITS
Hours counter provides accurate information for monitoring maintenance and warranty periods
Multiple engine parameters are monitored simultaneously

OPERATION
MANUALMODE
The module is started using the on-board key/buttons
The user turns the key to the position
The engine pre-heat button is then pressed for the required time
The start button is then pressed to start the engine
To stop the engine the key needs
AUTOMATICMODE
The key needs to be permanently left in the position
The module is powered up by the remote start signal
The pre-heat function is automatically carried out and then the engine is started
To stop the engine the remote switch is turned to the 'off' position
OVERSPEED PROTECTION
The engine over speed trip setting can be calibrated at the rear of the module for 50Hz or 60Hz nominal operation (57Hz or 68Hz trip respectively).
During engine cranking and for the first 10 seconds after the engine starts running, all alarm conditions are suspended (overspeed is enabled) to allow the engine to reach its optimum running speed.