Genset controller 704 generator controller
KEY FEATURES
Automatic mains (utility) supply monitoring
Automatic shutdown when fault conditions are detected
Manual start
Engine pre-heat
Engine monitoring and protection features
Protected Solid State (PSS) outputs
Front panel mounting
Front panel programming
Tamper proof engine hours counter

Specification
DC SUPPLY
CONTINUOUS VOLTAGE RATING
8V to 35V continuous
CRANKING DROPOUTS
Able to survive 0V for 50mS, providing supply was at least 10V before dropout and supply recovers to 5V. This is achieved without the
need for internal batteries.
MAXIMUM OPERATING CURRENT
50mA
TYPICAL CURRENT
12mA
CHARGE FAIL
8 Volt Charge Fail at 12 Volts
16 Volt Charge Fail at 24 Volts
INPUTS
ALTERNATOR INPUT RANGE
75V(L-N) to 333V AC (L-N) absolute maximum
ALTERNATOR INPUT FREQUENCY
50Hz 60Hz at rated engine speed
(minimum:75V AC L-N) (Crank Disconnect from
15V L-N @ 20Hz) Overspeed +14% (+24%
overshoot) Underspeed -20%
OUTPUTS
START & FUEL OUTPUTS
12 Amp DC at supply voltage Switches to battery negative when active
AUXILIARY OUTPUTS
1.2 Amp DC at supply voltage. Switches to battery negative when active
DIMENSIONS
OVERALL
165 mm x 125 mm x 29 mm
6.5" x 4.9" x 1.2"
CUT-OUT
149 mm X 109 mm
5.9" x 4.3"