Features:
Frame rails laser cut from 3mm carbon fiber.
26⁰ skid angle for insane breakover and even more available ground clearance.
Skid hole pattern is for Axial 3 gear transmission or simular.
Chassis length gives axle coverage up to 13.5" wb using 80mm front links.
Shock locations relocated and based on 80mm front lower links, and act as wheel travel adjusters. Top hole provides the minimum down travel, bottom hole provides the most down travel.
Provided you with multiple front and rear shock mount positions for shock tunning and body mounting.
Multiple front and rear mounting options for wheelbase tunning.
Included carrier bearing is still fully adjustable left to right, adjustable pitch, and fwd and back via 3 mounting locations.
Compact is the overall theme as always, keep it light, keep it simple.

Chassis Kit Includes:
x1 Carbon Rails (pair)
x1 Delrin Skid Plate
x1 Aluminum Carrier Bearing
x1 3D Printed Rock Sliders (pair)
x2 70mm Chassis Brace
x1 45mm Lower Link Brace
x1 Nylon Spacers Kit
x1 Hardware Kit

Needed to Complete:
-SHOCKS 80mm-90MM respectively for travel needs. No more than 90mm recomended. Big bore shocks are a great comparable budget option as well.
-TRANSMISSION compact required. EXO, Dlux Portal or NOD2 and others.
-MOTOR smaller is better. Recomend small/stubby outrunner like HOLMES/3BROS/Dlux/SEQURE and others.
-3x DRIVESHAFTS recomend "cut to length" in front for thier reduced shaft size for clearance and strength. Larger(normal) diameter plastic shafts can be used in rear no issue to save weight and money.
-ESC compact am32 of your choice recomended. DLUX, HOLMES HOBBIES, 3BROS, SEQURE etc.
-AXLES, 20% or more total OD recomended. 30% is ideal.
-SERVO.

Note: these is a custom build application, so be prepared for problem solving as not every axle, motor, transmission that is available on the market can be accounted for all in one.