1,Fuel nozzle siphon air atomizing nozzle two-fluid nozzle
diesel heavy oil waste oil Alcohol-based fuel burner nozzle
Bore diameter: 0.5mm,1mm, 1.3mm ,1.5mm,2mm,2.5mm,3mm,3.5mm.
Out diameter: 18mm
Total length: 78mm
oil inlet:1/8"
air inlet: 1/4"
Nozzle size: 9/16"
2,The air compressor should be capable of providing at least 10% more air than the specified values. All fuel and airline connections must be tight. Any leaks, especially in the fuel line, will have an adverse effect on the lift characteristics.
The nozzle will flow in either a horizontal or vertical position. The lift distance for a vertical mounted nozzle is measured from the liquid level to the end (face) of the nozzle. The lift distance for the horizontal mounting is shown in the installation drawing.
If the combustion application does not permit the use of a constant level device, excellent spray characteristics can be obtained using a fuel metering pump and an air compressor.
It is also possible to operate the nozzle in a closed pressurized system utilizing air pressure for both lifting and atomizing the fuel.
3,Siphon air atomizing nozzle is a low pressure can spray atomization of the best at low pressure air atomizing nozzle.