Features:

Detailed instructions:
1. Select a porous surface to apply your motif. Test fabric first to know if it can withstand the heat of the iron.
2. Set your iron to a medium high setting, or 350 degrees on a heat press. Turn the iron's steam off. Place the fabric to receive the transfer on a firm, flat surface. Iron the fabric before applying rhinestones.
3. Place a piece of parchment paper behind the fabric to avoid seeping.
4. Inspect the rhinestone design. On a hard surface, press the sheet to nudge offset stones back into position. Use the extra stones to replace missing stones. You can cut the design into separate pieces or trim away excess.
5. Peel the paper backing off the transfer. Place the sticky side down on the fabric. Reposition are allowed. Check the layout before ironing.
6. Iron the transfer with firm, even pressure. Do not wiggle or glide the iron. Heat all areas about 10-15 seconds depending on the size of the stones. Larger stones take more time. Metal studs take less. Ensure that all stones are heated and have pressure applied. The stones under your iron's vent holes will not receive pressure, so reposition the iron once or twice.
7. Cool to room temperature. Gently peel the sheet away. If any stones begin lifting up, replace the sheet and re iron. Your iron may need a higher heat setting if the glue is not melting.
8. After removing, briefly press the iron to the stones to reset loosened ones. The garment can be machine washed on a gentle, cold cycle. Lay flat or hang to dry.

Specifications:
Material: rhinestone
Color: clear, red
Size: length about 8.27 inches/ 21 cm, width about 5.12-7.87 inches/ 13-20 cm

Package includes:
6 x Christmas rhinestone transfers

Notes:
Manual measurement, please allow slight errors on size.
The color may exist a slight difference due to different screen displays.