Search

Search

Home / LNYTQG / Replacement Parts
Tapered Roller Bearings 27709 HM807040/HM807010 33281/33462 33281/33472 484/472 37431/37625 18690/18620 ST3062A-1(HM807040/HM807010) in Kuwait Tapered Roller Bearings 27709 HM807040/HM807010 33281/33462 33281/33472 484/472 37431/37625 18690/18620 ST3062A-1(HM807040/HM807010) in Kuwait Tapered Roller Bearings 27709 HM807040/HM807010 33281/33462 33281/33472 484/472 37431/37625 18690/18620 ST3062A-1(HM807040/HM807010) in Kuwait Tapered Roller Bearings 27709 HM807040/HM807010 33281/33462 33281/33472 484/472 37431/37625 18690/18620 ST3062A-1(HM807040/HM807010) in Kuwait Tapered Roller Bearings 27709 HM807040/HM807010 33281/33462 33281/33472 484/472 37431/37625 18690/18620 ST3062A-1(HM807040/HM807010) in Kuwait Tapered Roller Bearings 27709 HM807040/HM807010 33281/33462 33281/33472 484/472 37431/37625 18690/18620 ST3062A-1(HM807040/HM807010) in Kuwait Tapered Roller Bearings 27709 HM807040/HM807010 33281/33462 33281/33472 484/472 37431/37625 18690/18620 ST3062A-1(HM807040/HM807010) in Kuwait Tapered Roller Bearings 27709 HM807040/HM807010 33281/33462 33281/33472 484/472 37431/37625 18690/18620 ST3062A-1(HM807040/HM807010) in Kuwait

Tapered Roller Bearings 27709 HM807040/HM807010 33281/33462 33281/33472 484/472 37431/37625 18690/18620 ST3062A-1(HM807040/HM807010)

KWD 24.500
Brand
LNYTQG
Weight
499 g
– 1 +

Special Features

  • 1.Structural Features: Both inner and outer rings feature tapered raceways, with truncated cone-shaped rolling elements. The inner ring, outer ring, rolling elements, and cage collectively form a complete, separable assembly.
  • 2.Load-bearing capacity: Capable of simultaneously withstanding radial loads and unidirectional axial loads. Axial load capacity increases with contact angle; a larger contact angle makes it suitable for applications where axial loads constitute a higher proportion.
  • 3.Applicable Conditions: Commonly used in machinery subjected to combined loads, such as automotive hubs, axles, and gearboxes, as well as machine tool spindles and mining equipment. Particularly suitable for low-to-medium speed applications involving impact or vibration.
  • 4.Installation Requirements: Adjust the clearance during installation (achieved through relative axial displacement between the inner and outer rings). Excessive clearance may cause vibration and noise, while insufficient clearance may accelerate wear due to increased heat generation. A suitable locking device must be used in conjunction.
  • 5.Performance Limitations: Cannot withstand bidirectional axial loads. For bidirectional load-bearing requirements, must be installed in pairs with opposing directions.

Description

27709 45x100x32mm
HM807040/HM807010 44.45x104.775x36.512mm
33281/33462 71.438x117.475x30.162mm
33281/33472 71.438x120x29.794mm
484/472 70x120x29.7mm
37431/37625 109.538x158.75x23.02mm
18690/18620 46.038x79.375x17.462mm
ST3062A-1 29.5x62x12.5mm

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}