Car Engine Silicone Heating Pad 120v, 300w 6x8 Inch Universal Engine Heater Car Oil Pan Heater Pads, Electric Heated Pad Engine Block Oil Pan Tank Reservoir Container, for Metal Surface (1Pcs)
Easy to Use: 1.Clean the surface(clean with a damp cloth, then wipe dry with a dry cloth); 2.Peel off the backing paper in brown color; 3.Apply the silicone heater pad to the surface cleaned making sure no gap or air bubbles trapped under the pad. Plug power cord into any wall outlet. Note: The engine heating pad is designed to be used on the metal surface to heat the fluid, and do not use it on any plastic surface on the engine
Keep the Engine Warm: Use this engine heating pad during cold winters to quickly start your engine, maintain a good engine oil temperature, and improve engine performance, making starting your car easy
Temperature Protection: When the temperature exceeds 194°F/90°C, the universal heating pad will automatically shut off. When the temperature drops to around 40°C, the pad will restart to prevent engine overheating
Excellent Performance: The engine heating pad is made of high-quality silicone rubber and fiberglass cloth materials, offering high insulation performance, waterproof and oil-proof properties, stable performance, and wear and corrosion resistance, ensuring longer service life and greater efficiency. High-power 120V 300W, 1.5-meter cable length, larger size (5.91 x 7.87 inches), and fast heating speed
Wide Applications: Silicone heating pads are widely used in RVs, campers, trailers, boats, and other places in winter. Installed on engine oil pans, fuel tanks, transmission oil pans, and other locations, they can solve the problem of vehicle starting difficulties in winter
Instructions:
1. Clean the engine surface(Clean with a damp cloth, then wipe dry with a dry cloth)
2. Remove the brown backing paper
3. Apply the silicone heating pad to the clean surface, ensuring there are no gaps or air bubbles under the pad
4. Plug the power cord into any wall outlet
Note:
1. The engine heating pad is designed to heat oil on metal surfaces. Do not use it on any plastic surfaces in the engine
2. Ensure full contact during installation. Avoid air gaps or air bubbles during installation to prevent localized overheating
3. Although equipped with an automatic shut-off function, please avoid unattended operation for extended periods