How to Use:
Key Description:
MODE: Waveform Switching Button
CURSOR: Cursor Stabilization Button
RUN Or STOP: Start Waveform Output
+: Frequency Plus
‑: Frequency Minus
OFFSET Adjusts The Waveform Bias
AMP Adjusts The Waveform Amplitude

Specification:
Item Type: Function Signal Generator
Material: ABS
Frequency Range: Sine Waveform 1‑500KHz (Where The Output Amplitude is Flat Up to 200KHz, with The Further Increase in Frequency Output Amplitude Will Be Reduced), Other Waveforms 1‑50KHz (But The Upper Limit of Adjustable Frequency Does Not Limit, If The Distortion and Wobble Requirements Are Not High, The Use of Frequency can Be Further Increased)
Resolution: 1Hz
Output Waveform: Sine Wave, Square Wave, Triangle Wave, Forward Ramp, Reverse Ramp
Sine Wave Distortion: Output Amplitude: ±10V Maximum (P‑P)
Output Impedance: 50 Ohms
DC Offset: ±10V Maximum with Shutdown Function
Output Port Specification: Bnc
Output Frequency Range:
Sine Wave: 1‑500KHz ( Valid Range )
Square Wave: 1‑20KHz (Valid Range)
Triangle Wave: 1 ‑ 20KHz (Valid Range)
Sawtooth Wave: 1‑20KHz (Valid Range)

Package List:
1 x Function Signal Generator
1 x Instruction Manual
1 x USB Cable