Item Type: Coolant Crossover Kit
Material: Stainless Steel, CNC Aluminum
Fitment: Fit for LS series LS1 LS2 LS3 LS6 LS7 Engines
Compatible Air Intakes:
Replacement for Holley
Replacement for Pro-Flo XT
Replacement for Super Victor
Replacement for Frankenstein
Replacement for Victor Junior
Replacement for Style Plastic Gen 3 Truck Air Intake

Package List：
5 x Center Manifold Pipes
1 x Corner Manifold Port
4 x Coupler
9 x End Fittings
4 x Screws
1 Roll x Tape

Note:
1. This kit will clear factory knock sensors on Gen 3 engines.
2. For LS3 L92 and other heads have the rear ports blocked off. This block off is a simple aluminum plug. You can knock this plug out from the bottom out (if heads are off) with a punch. It can also be carefully drilled out as our corner blocks seal off the top flat surface. DO NOT enlarge the hole size overall. Care must be taken to not let aluminum chips fall into the head passage so we suggest multiple careful drills with vacuuming in between and possibly greasing the drill bit.
3. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.