Application
The infrared paint curing lamp is suitable for automotive paint booths, local paint drying, putty drying, heaters, printing dryers, and different kinds of drying equipment, etc.

How to Install:
1.Install the two lamps and hold their ends with 2 clips.
2.Place the net into the housing. (Please be careful not to cut your hands.)
3.Fasten the two brackets to the ends of the housing with screws.
4.Connect the wires at each end of the lamp (right to right, left to left) and connect them to a neutral energized conductor (make sure the fire wire is on one end while the zero wire is on the other).

Specifications
Color: Red
Style: Modern
Material: Galvanized Board, Iron
Process: High-temperature Spraying Process
Heating Tube Type: Carbon Fiber
Assembly Required: Yes
Voltage: 110V, 50Hz
Heating Area: About 1m³/35.3ft³
Total Power: 2000W
Each Heating Tube Power: 1000W
Heating Temperature: About 200℃/392℉
Product Size: 62*18*5cm/24.4*7*1.97inch

Package Included
2x Paint Curing Lamps
4x Brackets
Other Needed Accessories

Notes
1.Please check the size carefully before ordering.
2.Please do not touch its surface and iron wire during heating to avoid burns.
3.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.