Device specification :

USA SELLER
Board comes fully assembled!
Comes with programmed ESP8266 WIFI module
Default firmware type Access Point, SSID "8CH relay AP", default IP address 192.168.4.1
PCB board dimension 130mm x 150mm
Operation DC voltage – 5.0V
Maximum peak current @5.0V – 2000mA
Maximum current per relay – 10A peak
LEDs indicators for each electromagnetic relay channel
Relays with SPDT switch contacts: Normally Open, Common, Normally Closed
Relay contact resistance 100 milliohms max. ( initial value )
Relay insulation resistance 100 MOhm min. (DC 500V)
Relay operation time 8 ms max
Relay release time 5ms max
Relay dielectric strength 750 VAC, 50/60Hz between contact
Relay dielectric strength 1,500 VAC, 50/60Hz between all elements
Relay expected life Mechanical - 10,000,000 operations min.
Relay expected life Electrical - 100,000 operations min. at rated load
Working temperature range - 25 C ~ + 80 C
The logic power supply voltage should match the voltage levels on the I2C bus.
For more information/resources, please contact with us via amazon messaging system.