KP18 series electronic load can be widely applied to product testing and ageing in LED lighting, power source, charger and accumulator
The current mode can be used for simulating resistive load to discharge the battery and load the power source, the voltage mode can be used for simulating capacitive load and load the charge, as well as simulating the constant voltage of LED and load the power source
It is used simply, adjusted conveniently and has perfect protection function
The performance and function are unmatched by traditional slide wire resistor
Note: about the BNC interface function, please know the follow function of BNC before you use this Extended function. If the voltage measurement is selected as the remote measurement (VOLTAGE REMOTE SENSE) in the menu settings, the BNC connector on the front panel must draw two wires to the positive and negative terminals of the measured voltage, otherwise the voltage measurement and display There will be inaccuracies in the error, especially when the load is loaded
Medical Electric Plaster Saw Cast Cutter Orthopedic Sports Medicine 110V 12500rpm/min (one set of plaster saw)
KWD 18
Concrete Vibrating Table Vibration Test Bench Test Block Vibration Platform Stainless Steel Mini Vibration Table 350x350MM (AC 110V)
KWD 86.500
Portable Professional Lure Fishing Rod Winding Machine DIY Fishing Rod Epoxy Resin Rotating Gluing Machine 0-30RPM Adjustable
KWD 16.500
Pressure Gauge Needle Pickers Needle Holders Gauge Indicator Needle Extractor Pressure Gauge Repair Tool 3PCS/Set
KWD 11
