Specification:
Item Type: 3D self adhesive sticker.
Pattern: As shown in the picture.
How To Use:
1. Plans and expectations, design and layout concept of expected paste position.
2. Wipe the box surface, wipe away dust and dirt on the surface of the box with a rag.
3. Tear off the low paper, tear off the bottom paper of the sticker to leave the sticker pattern.
4. Paste in place, press the sticker part to make the sticker and the box surface fit completely without leaving a gap.
5. Trimming, tear off, leave no glue, and unattached patterns can be removed and re-attached.
6. Hot air reinforcement, the sticker is completely pasted and finally reinforced with a hair dryer to prevent the sticker from curling.

Note:
The surface is not smooth Not suitable for pasting.