Function: Marine terminal blocks 12v/M6 single post bus bar/12V 150A junction block used to connect two or more connectors / wires,suitable for customizing battery and wiring setups; Metric M6 single studs are not compatible with imperial 1/4'' bolts.12v 150A power automotive terminal block/distribution stud simplify multiple power connections, as battery junction post maintaining a tidy circuit layout and reduce short circuit risks.
Tips: 12v marine bus bar/automotive terminal block/single stud bus bar M6/car audio power distribution block measured 1.64"x0.98"x1.57". Stainless Stud size: M6 Maximum working voltage: DC 48V. Maximum amplifier per circuit: determined by the connected wires.
Terminal Block 12v Specification:Positive junction block m6/M6 single stud bus bar / 150A battery junction post for battery power and ground junction; Max Continuous Amperage 150A (in a DC 12V circuit); Max Voltage DC 48V.
Application: Ground post 12v/M6 single stud bus bar/48V dc terminal block is designed to hold terminals securely in place;Suitable for low-current devices and for use in compact and confined spaces, Suitable for temporary test wiring, signal wires, low power devices so on.These junction posts are really handy to have for automotive wiring projects. They make battery and accessory connections much cleaner and more reliable than just stacking wires on a regular bolt. The reinforced nylon base feels solid, and the stainless hardware locks everything down securely without loosening over time.
Easy to Install: This 150 Amp buss bar 12v/M6 marine terminal block feature two screws hole panel for any any orientation installation; Allow 360° wire lug installation with no barrier block post; Recessed mounting holes for more aesthetics. Low cost budget, suitable for high volume use, and max up to 48V DC/AC power distribution stud application.