Search

Search

Home / PRV AUDIO / Home Audio Accessories
PRV AUDIO 1DF1800H High Pass Crossover Board 1800/2500Hz with Driver Attenuation Brightness Control in Kuwait PRV AUDIO 1DF1800H High Pass Crossover Board 1800/2500Hz with Driver Attenuation Brightness Control in Kuwait

PRV AUDIO 1DF1800H High Pass Crossover Board 1800/2500Hz with Driver Attenuation Brightness Control

KWD 16
– 1 +

Special Features

  • WOOFER IMPEDANCE SELECTION:This setting allows the same crossover to be used with 8 or 4 Ohms speakers and combinations of them (series or parallel connection) providing you with one solution for multiple cabinet variations.
  • WOOFER ROLL-OFF CROSSOVER ADJUSTMENT:Some woofers respond excessively at the cut off frequency than others and need 12 dB/octave filters, where other woofers have a natural roll-off at or near the crossover point, and work well with 6 dB/octave filters. We give you the ability to select this on two of our crossovers: the 2DF1800 two-way crossover and the 3DF400/1800 three-way crossover.
  • SPEAKER ATTENUATION: Match the output level of the different speakers in your cabinet with the setting; it helps in creating a seamless transition from high to mid to low-especially useful for when driver sensitivities do not match.
  • BRIGHTNESS ADJUSTMENT: Many large format compression drivers naturally roll-off above 10 kHz. Our brightness adjustment offsets this phenomenon , applying attenuation below 6 kHz and increasing the energy at high frequencies for more brightness and definition.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}