TAPERED BRUSH CHUCK HOLDER
CHUCK MANDREL - THREADED SPINDLE
Holds 3/32" & 1/8" CENTER HOLE

Tapered brush chuck designed to fit onto Right Handed tapered spindles of Polishing Motors to hold miniature un-mounted brushes with arbor holes of 3/32" and 1/8" can be attached.
The body of the chuck is made of nylon will self thread onto the tapered spindles and a steel tapered threaded arbor.

Miniature brushes can be threaded onto the steel tapered chuck, the nylon body can be threaded onto any standard tapered spindles of polishing motor or lathe.

Note: Make sure to have a pointed spindle with clean threads, to ensure a good tight fit.

Chuck is made to be used on a Tapered spindle with Right Hand- rotation.
Provides a good way to hold miniature Buffs, Bristle brushes.
Wheels and brushes can be threaded onto the steel taper threads.

Chuck is made to be used on the *** Right Hand Side of Motor on the tapered spindle with forward direction.

- HOLDS Miniature Brushes with arbor hole sizes: 3/32" - 1/8"

SPECIFICATIONS: JETS Product # 1603-431
- Material: Nylon Hub & Steel Arbor
- Overall Length: 3-1/8" - 80.mm
- Chuck Body Diameter: 1" - 24.9mm
- Arbor Shaft Length: 1-9/64" - 29mm
- Shaft Tapers: 3/16" - 4.7mm to Point
- Chuck Shaft Hole Diameter: 5/16" - 7.8mm
- Weight: 0.7oz. - 20gr