Search

Search

Home / DECKRKAT / Drill Parts & Accessories
DECKRKAT 2-Piece 9/16" Forstner Drill Bits - Smooth Flat Bottom Drill Bits for Wood, Hard & Soft Wood Drilling, 3/8" Shank Fits Drills/Drill Presses. in Kuwait DECKRKAT 2-Piece 9/16" Forstner Drill Bits - Smooth Flat Bottom Drill Bits for Wood, Hard & Soft Wood Drilling, 3/8" Shank Fits Drills/Drill Presses. in Kuwait DECKRKAT 2-Piece 9/16" Forstner Drill Bits - Smooth Flat Bottom Drill Bits for Wood, Hard & Soft Wood Drilling, 3/8" Shank Fits Drills/Drill Presses. in Kuwait DECKRKAT 2-Piece 9/16" Forstner Drill Bits - Smooth Flat Bottom Drill Bits for Wood, Hard & Soft Wood Drilling, 3/8" Shank Fits Drills/Drill Presses. in Kuwait DECKRKAT 2-Piece 9/16" Forstner Drill Bits - Smooth Flat Bottom Drill Bits for Wood, Hard & Soft Wood Drilling, 3/8" Shank Fits Drills/Drill Presses. in Kuwait DECKRKAT 2-Piece 9/16" Forstner Drill Bits - Smooth Flat Bottom Drill Bits for Wood, Hard & Soft Wood Drilling, 3/8" Shank Fits Drills/Drill Presses. in Kuwait DECKRKAT 2-Piece 9/16" Forstner Drill Bits - Smooth Flat Bottom Drill Bits for Wood, Hard & Soft Wood Drilling, 3/8" Shank Fits Drills/Drill Presses. in Kuwait

DECKRKAT 2-Piece 5/16" Forstner Drill Bits - Smooth Flat Bottom Drill Bits for Wood, Hard & Soft Wood Drilling, 3/8" Shank Fits Drills/Drill Presses.

KWD 5.500
All electronics ship with US style plugs. You may need a voltage converter or a plug adapter.
– 1 +

Special Features

  • Specifications: 2-Piece of Forstner Drill Bits are significantly precise and can produce an extreme clean-cut hole with a flat bottom, diameter size 9/16".
  • Accomplish Variety of Boring and Cutting Tasks: Forstner Drill Bits can be used in creative ways such as drilling holes for Dowels and cup hinges, making Overlapping holes; Angled holes for pocket screw; Partial holes and Counter bored holes.
  • Precise & Clean: You can use these Forstner Drill Bits bits to create precise clean flat-bottomed and pocket holes without chip in hard and soft wood, poly wood, plastic, and other materials; built with 3/8" shank compatible with both drill presses and handheld drills.
  • Using Forstner Drill Bits with a drill press: get a clean and plumb hole with minimal effort; 1, Position and Mark the Work piece and test if it's even; 2, drill at recommended RPMs 1200~1500 and retract the bit often to cool it; 3, Lower the drill press speed when finish the hole.
  • Cut with handheld drills requires patience and power: 1: Clamp Material, Mark Centre Point & Align Drill; 2: Start Drilling at a slow speed, holding the drill firmly to avoid bit walking. an auxiliary handle will help. 3: Increase the drill's speed, retracting the drill to remove chips.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}