What is this?
The DC motor speed controller is suitable for DC 12V 24V 60V 70V 30A pulse width modulation. It can easily provide a continuous current of 30A to your DC motor or other DC load. Effective to use for speed adjustment.

What will I get?
Overall Dimensions: 89x58x38mm/3.5x2.28x1.5 inch(L*W*H);
Voltage: DC 7-80V;
Maximum current: 30A;
In the package of: 1 x DC motor speed controller.

Are there any advantages of the product?
1.Wide voltage 7-80V high current 30A design has a wide range of applications and the switch on the board has the function of running, stopping and braking. The flexible cable of the adjustment potentiometer can be separated. The length of the cable is 15CM;
2. Circuit optimization design. The duty cycle adjustment range is wide, so the adjustment motor is smooth, no bath noise, no vibration. With power indicator, the circuit design is stable and suitable for long-term work.
3. It adopts imported high-voltage MOS tube, three high-frequency low-resistance capacitors with a voltage of 100V.

How to use it?
Before powering on the wiring, please read the wiring label clearly, the input is direct current, the positive and negative poles should be correct. The output connection to the motor does not need to be positive or negative. If the running direction is wrong, please exchange the two wires of the motor.

What should I notice?
Not suitable for speed regulator of brushless DC motor; Can not be used as a voltage regulator or regulator.