ATQUALOD 4.0"Bore x 1.75" Rod Cylinde Log Splitter Cylinder Rebuild Seal Kit
Extend the life of your log splitter cylinder with the 4.0" Bore x 1.75" Rod Cylinder Log Splitter Rebuild Seal Kit. This affordable kit provides an easy and effective way to rebuild the cylinder on your log splitter, preventing oil leaks and other cylinder damage.
Double check each seal groove is good for our part sitting in
Cylinder tube Bore (I.D.) 4.0" x rod (O.D) 1.75". Please note some cylinder rod head OD size is not rod size.
Wear rings. Piston wear ring : 101.6 mm ( OD 4") x 95.25mm (ID 3.75") x 9.53mm (0.375" wide), Nylon Rod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2”) x 9.53mm (0.375" wide), Nylon
Piston seals 1 square ring and 1 O-ring. Piston Square ring: D101.6 mm x91.6mm x 3.28mm; O-ring (installed under the square ring): 91.0 mm x 2.65 mm . CPU + NBR
Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside.
Rod dust ring (Item 12): 44.5mm x 54mm 5.5mm /7.3mm, TPU
Below is 4.0"Bore x 1.75" rod cylinder Specification that OEM made by this seal kit:
Retracted (center to center between rod mountain hole and clevis hole: 32.4” Extended (center to center same as above): 56.4”
Stroke: 24±0.05”
Dimension from center of clevis hole to back face of cylinder: 2.95” Dimension from center of rod end hole to front face of rod: 1.06” Dimension from center of rod end hole to front face of cylinder: 1.18” Ports: 1/2" NPT Dimension from port to port: 25.4”
Rod: 1.75" rod
Rod end mountain hole: 0.55”
Clevis Mountain hole: 1.16”
Dimension between mountain clevis to clevis: 0.87”
Thickness of each mountain clevis: 0.375”
Length of each mounting clevis: 4.125”ATQUALOD 4.0"Bore x 1.75" Rod Cylinde Log Splitter Cylinder Rebuild Seal KitATQUALOD 4.0"Bore x 1.75" Rod Cylinde Log Splitter Cylinder Rebuild Seal Kit

Package includes:
1 x 4.0"Bore x 1.75" Rod Cylinde Log Splitter Cylinder Rebuild Seal Kit