Specification of Y Branch Parallel Connector
Product Name: Y branch connector
Cable length: 30cm / 12inch
Gauge:12AWG (4mm²)
Insulation Material: PPO
Rated Current: 20A
Rated Voltage: DC1000V
Contact Resistance: ≤5mΩ
Insulation Resistance: >500mΩ
Waterproof: IP67
Flame Class: UL94-V0
Safety Degree: II
Operating Temperature range: -40℃ ~ +90℃
Suitable for Cord Section: 1.5mm² -- 6mm²
Means AWG14, AWG13,AWG12, AWG11,AWG10
Advantage:
1. low power loss
2. solar connector for solar power system
3. all the connection made by double fixed connection
4. withthe capacity of anti-aging and resistance to ultraviolet radiation on the outcover
5. withconvenient installation, strong commonality
6. to meet the using requirement under bad outdoor condition
Assembly Instructions
1. For protection against electric shock, PV connectors must be isolated from the power supply while being assembled or disassembled.
2. The end product must provide protection from electric shock.
3. Unplugging under load: PV plug connections muct not be unplugged while under load. They can be placed in a no load state by switching off the DC/AC converter or breaking the AC circuit interrupter. Plugging and unplugging while under voltage is permitted.
4. Disconnected connectors should be protected from dirt and water with sealing caps.