Tips: You can follow the car model adaptation operation guide in the picture to ensure that it is suitable for your car model before purchasing
Note : Will not retain some features like steering audio controls, rear DVD audio etc unless extra adapters use. Does not fit vehicles with 6 speakers system, this wiring harness is usual for car standard stereo, not compatible with amplified systems like Bose, Infinity, etc
Red Ignition Wire : If your original radio harness does not have an ignition wire,you will not be able to control the aftermarket stereo on/off from the original radio harness.Only when the red wire is connected to the ignition port can power be supplied to the stereo. Simply attach one end to the ACC wire of the harness that comes with aftermarket radio,and connect the other end to the ACC wiring position located behind vehicle's ignition switch
22 Pin Radio Wire Harness : Used to replacing the factory radio with an aftermarket radio.The wiring harness is standard color coded so there is no need to cut any wires, just connect or solder it to the aftermarket radio connector and plug the adapter on the other end directly into the factory plug
Antenna Adapter : Used to connect the factory antenna to the aftermarket radio,the DIN plug plugs directly into the aftermarket radio and the fakra connector connects to the factory antenna
Applicable Model : Car Truck SUV Radio
Package list : 1 x Car radio wiring harness,1 x Antenna cable adapter,1 x Ignition power wire,16 x Butt connectors