√【Compatible With】:The Cure Steering Adapter Fit For most factory linkage of the below models, 1997 to 2006 TJ Wrangler, Rubicon and Unlimited. 1984 to 2001 XJ Cherokee. 1986 to 1992 MJ Comanche. 1987 to 1996 YJ Wrangler. 1993 to 1998 Jeep Grand Cherokee ZJ.
√【High Quality】:This cure is for Jeep Y link steering and is designed around the Jeep tie rod ends. This Steering Adapter is made of high hardness plastic material with good support effect. Wear-resistant, use for long service life.
√【Simple Installation】:Both tie rod and cure are used. Cleaned and painted the tie rod. Would grease after install. Tie rod is tight and worked well. When installing The Cure for Jeep, be sure to verify that the pin on your tie rod end seats completely in the taper.
√【Notes】:The Cure specifically made to work with a factory Jeep steering set up in the Y-link or inverted T style steering position, using the stock tie rods. Not for use on tie rod ends at the knuckle or pitman arm.
√【Perfect Service】:If you have any other questions on our this The Cure Steering Adapter Axle Bushing, please contact us at the first time. Our products have been quality tested before leaving the factory, and you can buy them with confidence.