Product Performance：This seal is a replacement for the older LEER 100XQ all glass rear doors that do not have a door skirt. The seal comes with a strip of premium 3M double sided tape attached and ready to install on the bottom of the rear door. 1-3/8" Tall
Compatible With: Fits 3/16" thick glass. Once installed the flap will hang down 1/2" from bottom of glass door. It may not be applicable to all LEER 100XQ truck covers. Please confirm whether your equipment initially had this seal
For leer truck cap seal High Quality Material: Using high-quality rubber, it has excellent durability and wear resistance, and can withstand high impact and heavy loads in hot and cold environments
For leer truck cap seal Easy To Install: Firstly, remove all tape/residue from the old seals and glass. Then, clean the glass with alcohol to remove all dirt and oil. Next, peel off the backing from approximately 2 inches of 3M tape on both ends of the seal and push the seal to the edge of the glass. Once the seal reaches the desired position, gently peel off the remaining backing from the tape. Finally, press it evenly onto the glass on the side of the seal and tape to help bond
Note: If the seal seems too tight when closing the door against the tailgate, you may have to adjust the rear door up at the hinges. This seal may not be applicable to all LEER 100XQ truck covers. Please confirm whether your equipment initially had this seal
-5%
Short Pro Tool - 24 VAC Circuit Short Finder Quickly Locate Shorts in HVAC Fuse Saver, Circuit Tester Short Finder Diagnostic Tool, Resettable Fuse Kit with Light Indicator and Automatic Reset
KWD 9
-15%
WB15X10276 Microwave Door Handle WB06X10943 Handle Kit White Compatible with General Electric GE Microwave Replace AP5790515 PS8754173 EAP8754173 (Contains 2 Screws)
KWD 8.500
3 Pack G8 Light Bulbs for GE Microwave Oven-120V 50W Halogen Light Bulb Fits for GE Over The Stove Range Microwave Hood Night Light/Stove Light Bulb,Replaces WB08X10051 WB08X10057
KWD 3.500
-6%
for Peterbilt 379 Cable Stud Bolt with Retaining Ring Compatible with Peterbilt 379 Hood Cable Bolts#13-03663
KWD 8
