Search

Search

Home / Fraylis / Replacement Parts
-27%
4" Rear Bump Stops Compatible with Grand Cherokee ZJ 1993-1998, Grand Wagoneer 1993, Rear Axle Jounce Bumper KU09022BK in Kuwait 4" Rear Bump Stops Compatible with Grand Cherokee ZJ 1993-1998, Grand Wagoneer 1993, Rear Axle Jounce Bumper KU09022BK in Kuwait 4" Rear Bump Stops Compatible with Grand Cherokee ZJ 1993-1998, Grand Wagoneer 1993, Rear Axle Jounce Bumper KU09022BK in Kuwait 4" Rear Bump Stops Compatible with Grand Cherokee ZJ 1993-1998, Grand Wagoneer 1993, Rear Axle Jounce Bumper KU09022BK in Kuwait 4" Rear Bump Stops Compatible with Grand Cherokee ZJ 1993-1998, Grand Wagoneer 1993, Rear Axle Jounce Bumper KU09022BK in Kuwait 4" Rear Bump Stops Compatible with Grand Cherokee ZJ 1993-1998, Grand Wagoneer 1993, Rear Axle Jounce Bumper KU09022BK in Kuwait 4" Rear Bump Stops Compatible with Grand Cherokee ZJ 1993-1998, Grand Wagoneer 1993, Rear Axle Jounce Bumper KU09022BK in Kuwait

4" Rear Bump Stops Compatible with Grand Cherokee ZJ 1993-1998, Grand Wagoneer 1993, Rear Axle Jounce Bumper KU09022BK

KWD 7.500
KWD 9.500
Brand
Fraylis
Weight
318 g
– 1 +

Special Features

  • Compatibility: Compatible with Grand Cherokee ZJ 1993-1998, Grand Wagoneer 1993
  • Performance: Made of high quality polyurethane foam,, good performance
  • Installation Tip1 First, carefully inspect the cup to make sure all the old buffer material has been removed. Then, use a suitable cleaning tool to wipe the edge of the cup clean to ensure that there is no impurities and dirt on the edge of the cup, Jack up the rig body from the frame just in front of the rear tire. Pay special attention when jacking up, and leave about 3-4 inches of additional clearance from the axle to ensure that subsequent operations can proceed smoothly
  • Installation Tip2 Secure the buffer block firmly in the cup. Use a measuring tool to measure the distance from the buffer block to the axle tube, and then cut the 2x4 wood to the corresponding length based on this measurement, Mix a small solution of liquid soap and water and use it to lubricate the surface of the cup and buffer block to reduce friction during installation. Place the lubricated buffer in the cup and place the cut 2x4 wood on the axle tube with one end against the bottom of the buffer
  • Installation Tip3 Return to the jack operation and slowly lower the jack. If the 2x4 or bumper tends to move sideways during the lowering process, immediately use another piece of wood to help secure the bumper and ensure that it remains straight, Once the body of the drill is stable, the bumper will slide smoothly into the cup and lock into place. At this point, jack up the body of the drill again and carefully remove the 2x4 and other items that were used to help with alignment during the installation process, Lower the jack, move to the other side of the drill, and repeat the same steps as above.
  • Packing list: 2 x Rear Axle Jounce Bumper
  • OE Reference Number: KU09022BK

Description

Compatible Models:
Compatible with Grand Cherokee ZJ 1993-1998
Compatible with Grand Wagoneer 1993

OE Reference Number:
KU09022BK

Packing List:
2 x Rear Axle Jounce Bumper

Notice:
Note: The product does not include an instruction manual. Please check the product images carefully before purchasing, the product is suitable for the model and year, and please make sure the OE number matches the part you want to replace. Professional installation recommended

We strive to provide customers with quality products and a better shopping experience, all emails will be responded to within 24 hours.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}