Finds the problems like high corrosive resistance, shorts to ground and open circuits easy & fast.
By loading the circuit, LOADpro makes a voltage drop test "on the fly". Just press the switch, the test results can not lie.
This is the only OEM/manufacturer approved tool that can locate corrosion in wiring with a digital voltmeter.
LOADpro test leads work with almost any digital mustimeter.
Also features steady pin probe tips allowing the probe to sit firmly on a male ECM or connector pin.
Description
Clear version of LOADpro, you can see the load inside the handle. LOADpro peforms a voltage drop test with the push of a button. On a 12 Volt system, pressing the switch applies a load of approximately 0.5 Amps on the circuit. This simple test finds corroded wires, bad connections & grounds and shorts to ground. Press the button, if the voltage drops, it's a circuit problem, not the part.
