Cams Run to 6,500 Rpm With Stock Hydraulic Lifters; Recommend Solids Not Be Installed
Stock Base Circle Sizes Allow the Use of Stock Pushrods
N4 Cams Are for Stock or Modified Applications and Have a Slightly Higher Idle Speed, but Can Be Used With Stock Hydraulic Lifters and Springs; Rpm Range of 2,500-6,500
Designed to Fit 1991-1999 Harley Davidson XL and 1994-1999 Buell Models
Made in the USA
Sold in Pairs

INTAKEOpen (In Degrees): 30
Close (In Degrees): 46
Duration at .053 (In Degrees): 256
Duration at .020 (In Degrees): 296
Valve Lift: .490
Lift at TDC: .216

EXHAUSTOpen (In Degrees): 52
Close (In Degrees): 24
Duration at .053 (In Degrees): 256
Duration at .020 (In Degrees): 296
Valve Lift: .490
Lift at TDC: .189

NOTE: It Is the Installer's Responsibility to Check Coil Bind and All Clearances
NOTE: The Image Displayed Is Representative of Andrews Cams, but May Vary Depending on Your Specific Model.