This quick nut will fit all model balancers with 40mm X 3mm shaft. To check, measure the shaft diameter (40mm) and the thread spacing (3mm) on your balancer shaft. Thread spacing is the distance of one thread and one space; for example, the distance from the left edge of a thread to the left edge of the next thread.
NOTE: YOU MUST CHECK THE SHAFT THREAD PITCH TO SEE IF YOU HAVE A 3MM OR 4MM BEFORE ORDERING.
Package includes 1x quick clamp wing nut, 1x pressure cup and 1x protector ring.
Tire Changer/Machine Adapter for Tire Changers in which Standard Jaw Claw are Below 49mm, Increases 4 inches and Decrease 2 inches on Rim clamp Size, 4pcs Set
KWD 4.500
(30mm Straight Hole) Tire Changer Duck Head Attachment Duckhead, Replacement Mount Demount Tool, Stainless Steel
KWD 12.500
Torque Wrench 1/2-Inch Drive, 40~300 ft.lb / 54~406 Nm
KWD 10.500
Wheel Weights Remover, Wheel Balancer Accessory, Tire Balancing Tool, Wheel Weight Chisel Scraper
KWD 4
