Insert & Align Gently slide the tapered tip of the tool (3.2mm or 2.8mm) into the pivot hole. Rotate until the tool's flat side matches the D-shaped pivot hole, ensuring perfect alignment.
Clearance Check Visually confirm even gaps between washers, blade, and scales before proceeding. If resistance occurs, rock the tool slightly or rotate the handle to help components settle.
Release Spring Tension Pull back the tool's shaft to relieve Axis lock pressure, allowing smooth insertion. Never force the tool—gentle wiggling aids alignment without damaging parts.
Secure Components Once fully inserted, release the shaft; spring tension locks everything in place. The tool's tapered shoulder and precise fit keep washers/blade centered during reassembly.
Install Pivot Pin With all parts aligned, slide the pivot pin through the tool's guide hole. Remove the tool and tighten screws for a play-free, drop-shut action.
Description
Insert & Align Gently slide the tapered tip of the tool (3.2mm or 2.8mm) into the pivot hole. Rotate until the tool's flat side matches the D-shaped pivot hole, ensuring perfect alignment.
SUPROJDM for M12 Polisher Sander Threaded 1/4" Adapter…
KWD 4
ER11 Collet Adapter with collets for M12 polisher/sander
KWD 7.500
SUPROJDM BAND SAW TABLE INSERTPLATE 212 TWO PACK ALUMINUM DELTA ROCKWELL NEW MADE 6061 Aluminum
KWD 5
-10%
Astro Pneumatic Tool 235B Standard-Duty Low Speed Tire Buffer Kit
KWD 27
