ISURE MARINE Battery Disconnect Switch Master

Specification :
Operation:On/Off
Materials:ABS plastic housing
Water Resistance:Yes
Mounting:Recessed or Surface
Continuous Rating:275 Amps DC
Intermittent Rating:455 Amps DC
Momentary Rating:1250 Amps DC
Voltage Rating:12-48V DC
Terminal Stud Size:3/8" (10mm Threaded Studs with Nuts)
Dimensions: 2-3/4" L(69mm) x 2-3/4" W(69mm) x 3" H(75mm)
The battery shut-off switch disconnects your battery safely, preventing excessive drain when your vehicle or boat isn't in use.
This quick disconnect switch is designed for 12-48V DC systems, allowing you to isolate and secure your electrical system.

Scope of Application:
This universal switch is suitable not just for cars, RVs, trucks, and marine boats but also for various electrical equipment, like flashing lights, chassis lights, fog lights, and dome lights.

NOTE:
The rated current of the switch is 275A, please do not exceed this value for a long time! Otherwise the switch will burn out
Please use the switch strictly according to the wiring diagram! Incorrect wiring will not have the effect of disconnecting the power.

Battery Kill Switch 12V Installation Tips:
Step 1- Remove Cables from Battery (Please disconnect both the positive and the negative cables from the battery poles to ensure your safety)
Step 2- Remove Negative Cable Terminal
Step 3- Wire in Switch (Wire it in between the cable and the battery terminal so that the switch will break the connection to the battery when it is off. Make sure when you add the switch that you install it in the "On" position.)
Step 4-Reattach the Terminal:Reconnect the negative cable terminal.
Step 5-Secure the Switch to the Frame:Fasten the switch securely to the frame or your chosen mounting location.
Step 6-Reconnect Battery Cables:Reattach both the positive and negative battery cables, completing the installation.