Search

Search

Home / MakerFocus / Remote Controlled Vehicles & Parts
MakerFocus 4pcs 3.7V 1100mAh Lithium Polymer Battery 1S 1C LiPo Rechargeable Battery with Protection Board, Insulated Rubber Tape and JST 1.25 Plug for ESP32 Development Board in Kuwait MakerFocus 4pcs 3.7V 1100mAh Lithium Polymer Battery 1S 1C LiPo Rechargeable Battery with Protection Board, Insulated Rubber Tape and JST 1.25 Plug for ESP32 Development Board in Kuwait MakerFocus 4pcs 3.7V 1100mAh Lithium Polymer Battery 1S 1C LiPo Rechargeable Battery with Protection Board, Insulated Rubber Tape and JST 1.25 Plug for ESP32 Development Board in Kuwait MakerFocus 4pcs 3.7V 1100mAh Lithium Polymer Battery 1S 1C LiPo Rechargeable Battery with Protection Board, Insulated Rubber Tape and JST 1.25 Plug for ESP32 Development Board in Kuwait MakerFocus 4pcs 3.7V 1100mAh Lithium Polymer Battery 1S 1C LiPo Rechargeable Battery with Protection Board, Insulated Rubber Tape and JST 1.25 Plug for ESP32 Development Board in Kuwait MakerFocus 4pcs 3.7V 1100mAh Lithium Polymer Battery 1S 1C LiPo Rechargeable Battery with Protection Board, Insulated Rubber Tape and JST 1.25 Plug for ESP32 Development Board in Kuwait MakerFocus 4pcs 3.7V 1100mAh Lithium Polymer Battery 1S 1C LiPo Rechargeable Battery with Protection Board, Insulated Rubber Tape and JST 1.25 Plug for ESP32 Development Board in Kuwait MakerFocus 4pcs 3.7V 1100mAh Lithium Polymer Battery 1S 1C LiPo Rechargeable Battery with Protection Board, Insulated Rubber Tape and JST 1.25 Plug for ESP32 Development Board in Kuwait MakerFocus 4pcs 3.7V 1100mAh Lithium Polymer Battery 1S 1C LiPo Rechargeable Battery with Protection Board, Insulated Rubber Tape and JST 1.25 Plug for ESP32 Development Board in Kuwait MakerFocus 4pcs 3.7V 1100mAh Lithium Polymer Battery 1S 1C LiPo Rechargeable Battery with Protection Board, Insulated Rubber Tape and JST 1.25 Plug for ESP32 Development Board in Kuwait MakerFocus 4pcs 3.7V 1100mAh Lithium Polymer Battery 1S 1C LiPo Rechargeable Battery with Protection Board, Insulated Rubber Tape and JST 1.25 Plug for ESP32 Development Board in Kuwait MakerFocus 4pcs 3.7V 1100mAh Lithium Polymer Battery 1S 1C LiPo Rechargeable Battery with Protection Board, Insulated Rubber Tape and JST 1.25 Plug for ESP32 Development Board in Kuwait MakerFocus 4pcs 3.7V 1100mAh Lithium Polymer Battery 1S 1C LiPo Rechargeable Battery with Protection Board, Insulated Rubber Tape and JST 1.25 Plug for ESP32 Development Board in Kuwait MakerFocus 4pcs 3.7V 1100mAh Lithium Polymer Battery 1S 1C LiPo Rechargeable Battery with Protection Board, Insulated Rubber Tape and JST 1.25 Plug for ESP32 Development Board in Kuwait MakerFocus 4pcs 3.7V 1100mAh Lithium Polymer Battery 1S 1C LiPo Rechargeable Battery with Protection Board, Insulated Rubber Tape and JST 1.25 Plug for ESP32 Development Board in Kuwait

2

KWD 8
Brand
MakerFocus
Weight
18 g
Size2
– 1 +

Special Features

  • Charging Method: The recommended battery charging current is 0.2A, with a maximum of 1A. The recommended discharge current is 0.5A, the maximum is not more than 1A, the protection board is equipped with mos tube, the overcurrent protection (instantaneous) is 1.6-2.2A, and the charging voltage setting is recommended to be 4.2V
  • Overcharge Protection: When charging the battery, when the voltage reaches the highest battery voltage (4.2V), the protection board will automatically power off and shut down, indicating that it will not continue to charge when fully charged, form an overcharge protection
  • Over-discharge Protection: When the battery is about to run out and the voltage is as low as 3.0V, the protection board will also be turned off and can no longer be discharged, forming an over-discharge protection effect
  • Short Circuit Protection: When an accidental short circuit occurs, the protection board will automatically shut down within a few milliseconds and will not be powered on again. Note that the cell is short-circuited (not through the protection board). The protection board will also fail due to continuous high current, or the components are heated and damaged
  • Note: battery overcurrent protection is not a panacea, please do not continue to charge and discharge with large current, or the current and voltage beyond the range, otherwise the protection board will be damaged and invalid

Description

Specification:
Standard voltage: 3.7V
Capacity: 1100mAh
Approximate weight: 19g
Dimensions (±2mm): 50*30*8mm(L*W*H)
Discharge rate: 1C
Working current: 1.5A
Maximum discharge current: 3C
Overcurrent protection: 1.8-2.1A
Connector Type: Micro JST 1.25

Standard Charging Method:
Charge the battery to 4.25V with a constant current of 0.2C, and then charge it with a constant voltage of 4.2V until the charging current is less than or equal to 0.05C.

Package Included:
4 * 1100mAh 3.7V lithium rechargeable battery

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}