Binding method between FS-iA6B receiver and transmitter:
1, Connect the included binding cable to the receiver's B/VCC port.
2, Plug the DC 4V-6.5V power supply into other ports, the positive and negative poles cannot be wrongly connected.
3, Keep pressing the "BIND KEY", and then turn on the transmitter to enter the binding mode.
4, The transmitter will display the RX voltage, that means the binding is successful.
5, Remove binding wire, Check the operation of the servos.
If something doesn't work as expected, start this process from the beginning.
Note: After the receiver and transmitter are successfully bound,
FS-iA6B does not need to insert a "Bind plug" during normal use.

FS-iA6B Specifications:
Item: FS-iA6B Receiver
Channels: PWM 6CH/ PPM 8CH/ s.bus 10CH / i.bus 10CH
(Select from transmitter menu 'SYSTEN-RX setup-Outprt mode')
2.4GHz System: AFHDS 2A
Model Type: Fixed-Wing/Glider/Helicopter/Quadcopter/Car/Boat
RF Range: 2.4055-2.475GHz
RF Receiver Sensitivity: -105dBm
Bandwidth: 500KHz
Modulation Type: GFSK
Power: 4.2-8.4V DC
Antenna Length:1.02inch 26mm (Dual Antenna).
Antenna Total length:150mm*2
Weight: 0.53oz / 14.9g
Size: 1.85*1.03*0.59inch / 47*26.2*14.9mm
i-BUS Port: Yes
Data Acquisition Port: Yes
Color: Black
Certificate: CE,FCC

Package Included:
1x FS-iA6b Receiver
1x Bind plug