TPM 2.0 Module, 14-Pin SPI Interface with infineon SLB9670, Compatible with Asrock Motherboard
KWD 8.500
TPM 2.0 Module, 18-Pin LPC Interface with infineon SLB9665, Compatible with Asrock Motherboard
KWD 8.500
RP2040 Board Type-C USB-C, 16MB Flash, Compatible with Raspberry Pi Pico Micropython
KWD 4
TPM 2.0 Module, 12-Pin SPI Interface with infineon SLB9670, Compatible with GigaByte Motherboard
KWD 8.500
TPM 2.0 Module, 14-Pin SPI Interface with infineon SLB9670, Compatible with ASUS Motherboard
KWD 8.500
PTM7950 Phase Change Thermal Pad, 1.22 x 1.97 x 0.01in, 0.25mm Thick, 8.5W/mK, for CPU GPU PS5 Steam Deck (31 * 50 * 0.25mm)
KWD 4
INA219 DC Current Sensor Module, 26V 3.2A, I2C Interface, 2-Pack
KWD 3
MS4525DO Differential Airspeed Sensor, Pitot Tube, Air Speedometer Airspeed Sensor for Pixhawk 4 PX4 Flight Controller, RC Air Plane, Fixed Wing Drone
KWD 19
2PCS ICM-42688-6-Axis IMU Accelerometer Gyroscope, I2C SPI Interface, Compatible with Arduino ESP32 Raspberry Pi(ICM-42688-p), ICM-42688 Breakout Board
KWD 9
2512 SMD Resistor Kit, 1Set/330Pcs 1R-1M Ohm 33 Values, 5% Tolerance, 1W Resistors Assortment Kit for Electronic,1 Watt Resistors, Shunt Resistor
KWD 6.500
BMP390 Barometric Pressure Sensor, High Precision, Altimeter Sensor, I2C and SPI Interface, with I2C Connector Cable, for Arduino/ESP32
KWD 6
2PCS SHT41 Temperature Humidity Sensor Module, I2C, ±0.2℃ Precision, Temp/RH, Breakout Board for Arduino ESP32
KWD 4
2PCS MCP3008-I/P MCP3008 8-Channel 10-Bit ADC Converter, SPI Interface, 200kSPS, DIP-16, ADC, A/D Converters, Analog to Digital Converter
KWD 5.500
1PCS SHT40 Temperature Humidity Sensor Module, I2C, ±0.2℃ Precision, Temp/RH, Breakout Board for Arduino ESP32
KWD 3.500
2PCS AHT20 Temperature/Humidity Sensor Module, I2C, Breakout Board,for Arduino Temp/RH
KWD 2.500
S8 Infrared CO2 Sensor, 400-2000(10000) PPM Range, UART/Serial/Modbus Output
KWD 16.500
10 PCS Logic Level Converter Module, 4 Channel IIC I2C UART SPI, 3.3V-5V Bi-Directional for Arduino/ESP32
KWD 2.500
5PCS TXS0108E High Speed 60Mbps Bi-Directional Logic Level Converter 8 Way 8 Channel Level Conversion Module 8 CH Logic Level Shifter Module
KWD 3.500
SPS30 PM2.5 Particulate Matter Sensor, PM1.0, PM2.5, PM4, PM10, UART/I2C Interface
KWD 17.500
ICM-20948 9DoF IMU, 9-Axis Motion Tracking, Digital Motion Processor, Accelerometer, Gyroscope, Magnetometer, I2C & SPI
KWD 7.500
TPM 2.0 Module, 12-Pin SPI Interface with infineon SLB9670, Compatible with MSI Motherboard
KWD 8.500
5 Pack ATmega328P-PU Microcontroller, 8-bit, with Bootloader Compatible with Arduino UNO,DIP-28
KWD 10.500
SCD41 CO2 Sensor Module, Carbon Dioxide, Temperature, Humidity Sensor, I2C
KWD 11.500
LSM6DS3 6-axis IMU 3-axis Accelerometer 3-axisGyroscope Sensor 6 Degrees of Freedom,Embedded Temperature Sensor, SPI I2C
KWD 3
2 PCS ATmega328P-PU Microcontroller, 8-bit, with Bootloader Compatible with Arduino,DIP-28
KWD 6.500
USB Isolator Module ADUM4160, USB Digital Isolation, USB to USB Voltage Isolator Board Protection, USB Ground Loop Isolator
KWD 8
USB to TTL Serial Cable for Raspberry Pi 5, Debugging UART Terminal Cable Adapter, 3.28 ft
KWD 4.500
PTM7950 Thermal Pad Phase Change Material, 3.15 * 3.15 * 0.008in, 8.5W/mK, Thermal Conductive for Heatsink, PS5, Steam Deck, CPU, GPU, SSD (80x80x0.2mm)
KWD 7
PTM7000 Thermal Pad Phase Change Material, 3.15 x 1.57 x 0.01 in, 0.25mm Thick, 6.5W/mK, for Heatsink, PS5, Steam Deck, CPU, GPU, SSD
KWD 4.500
PTM7950 Thermal Pad Phase Change Material, 3.15 x 1.57 x 0.01in, 0.25mm Thick, 8.5W/mK, for CPU, GPU, Heatsink, PS5, Steam Deck, SSD
KWD 7
PTM7950 Thermal Pad Phase Change Material, 3.15 x 3.15 x 0.01in, 0.25mm Thick, 8.5W/mK, for CPU, GPU, Heatsink, PS5, Steam Deck, SSD
KWD 10